Wren Sports Inverted Mountain Bike Suspension Fork - 110mm travel - 15x110mm boost through axle

29er or 32" Wheel Capacity

Yes, all Wren Inverted suspension forks fit 32" wheels. Rocking a 32" wheel on our inverted suspension does require a simple internal tune which reduces the travel by 30mm but maintains the fork's full axle to crown height. This means you can run our suspension with a 32" wheel at 120mm of travel and 80mm of travel depending on which model fork you buy.

These travel reductions are absolutely vital for using 32" wheels safely with our fork. Failure to reduce your fork's travel WILL RESULT IN A VERY BAD TIME, as you will hit the fork's crown with the tire on a big impact.

In Wren's tests, we found that the added rollover benefits of 32" wheels more than made up for the loss in travel when comparing a 29er at 150mm of front suspension vs a 32er at 120mm of front suspension. For what it's worth, we're big fans of big wheels.

• Tire Size: Width - 110 mm hub is up to 3.0″. Please refer to the tire size chart.
  Wheel Size*: 26″ to 32″. Please refer to the wheel size chart.
  Steerer: 7050 Alloy Tapered – 1.125″ ~ 1.5″, Length: 260 mm
  Crown: 6066T6 Alloy 3D forged
  Stanchions: 7050 Alloy hard anodized, 36mm
  Uppers: 7050 Alloyhard anodized, 43mm
  Dropouts: Forged
  Axle: QR15, 15 mm quick-release thru-axle
  Brake: PM6 post-mount, direct mount for a 160 mm rotor. Use adapters for 180 mm or 203 mm rotors
  Offset: 45mm
  Damper: All-Weather, sealed oil cartridge, adjustable rebound, and compression with true lockout.
  Airspring: TwinAir System, fully adjustable.

  Weights:
  110mm Travel – 2050 g / 4.5 lb
  150mm Travel – 2150 g / 4.7 lb

  *Travel might be limited due to size of wheel/tire combination

•