Grips and bar tape
The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet. They are available in 3 different offsets:
More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth’s PowerTrac Elliptical™ (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive...
This is the bottom bracket needed to fit a Praxis M30 crank onto a bike with BB86/90/92 bottom bracket system. Typically found on Trek bikes.
The PF30-SRAM adapts cranks with 22/24 mm spindles (SRAM/Truvativ) to work on Pressfit 30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline,..
T47 threaded BB cups for T47 frames and 29mm diameter spindle SRAM DUB compatible cranks. Cups have internal bearings, and can be used in BB shells with widths from 86mm to 121mm. Machined aluminum cups thread together directly into a T47 BB shell.
Expand your choice of cranks for use in frames with 41mm ID shells. Replace your bottom bracket with these dual-row flanged bearings and run 29mm spindle SRAM DUB compatible cranks in your frame. These bearings fit directly in frames with 41mm ID bottom..
While Innerbarends® bring your hands inwards, improving aerodynamics on long and straight stretches, the classic bar ends of the Stuby® grips have the advantage that when you're going uphill, pulling on the outside of the handlebars allows more power...
AXS enabled for easy monitoring and firmware upgradesBluetooth Low Energy and ANT+ compatiblePower readings are accurate within +/-1.5% and aren't affected by climate conditions during a rideUses a common CR2032 battery that last for 200 riding hours and
Expand your choice of cranks for use in frames with 41mm ID shells. Replace your bottom bracket with these dual-row flanged bearings and run 30mm spindle cranks in your frame. These bearings fit directly in frames with 41mm ID bottom bracket shells.
The 711 features perfect grip ergonomics for long-distance routes and use in racing on sports-oriented mountain bikes. A well thought-out, highly ergonomic shape offers an especially secure grip and comfort.
